|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TLP192G TOSHIBA Photocoupler Photorelay TLP192G PC Card Modems PBX STB (Set Top Boxes) Measurement Equipment The Toshiba TLP192G consists of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a 6-pin SOP package. This photorelay has a characteristic of high-withstanding voltage between output pins which enables TLP192G to be applied in hook relays and dial-pulse for modems and facsimiles. Moreover, the TLP192G is used for PCMCIA-compliant card modems because the maximum mounted height of SOP package is as small as 2.1 mm. * * * * * * * * * 6-pin SOP (2.54SOP4): Height = 2.1 mm, Pitch = 2.54 mm Normally open (1-form-A) device Peak Off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 110 mA (max) On-state resistance: 35 (max, t < 1 s) On-state resistance: 50 (max, continuous) Isolation voltage: 1500 Vrms (min) UL recognized: UL1557, File No.E67349 JEDEC JEITA TOSHIBA Weight: 0.2 g (typ.) 11-7C1 Unit: mm Pin Configuration (top view) 1 6 1: Anode 2 5 2: Cathode 4: Drain D1 5: Source 6: Drain D2 3 4 Schematic 1 6 2 5 4 1 2002-04-19 TLP192G Maximum Rating (Ta = 25C) Characteristics Forward current Forward current derating (Ta > 25C) = Reverse voltage Junction temperature Off-state output terminal voltage On-state current Detector Forward current derating (Ta > 25C) = Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. < 60%) = (Note 1) Symbol IF DIF/C VR Tj VOFF ION DION/C Tj Tstg Topr Tsol BVS Rating 50 -0.5 5 125 350 110 -1.1 125 -55~125 -40~85 260 1500 Unit mA mA/C V C V mA mA/C C C C C Vrms LED Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min 3/4 5 3/4 -20 Typ. 3/4 10 3/4 3/4 Max 280 25 100 65 Unit V mA mA C Electrical Characteristics (Ta = 25C) Characteristics Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 350 V V = 0, f = 1 MHz Min 1.0 3/4 3/4 3/4 3/4 Typ. 1.15 3/4 30 3/4 30 Max 1.3 10 3/4 1 3/4 Unit V mA pF mA pF 2 2002-04-19 TLP192G Coupled Electrical Characteristics (Ta = 25C) Characteristics Trigger LED current Return LED current A connection On-state resistance B connection C connection RON Symbol IFT IFC Test Condition ION = 110 mA IOFF = 100 mA ION = 110 mA, IF = 5 mA, t < 1 s ION = 110 mA, IF = 5 mA ION = 110 mA, IF = 5 mA ION = 220 mA, IF = 5 mA 3/4 Min 3/4 0.1 3/4 Typ. 1 3/4 25 35 28 14 Max 3 3/4 35 50 40 20 W Unit mA mA Switching Characteristics (Ta = 25C) Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 min Isolation voltage BVS AC, 1 s, in oil DC, 1 min, in oil Min 3/4 5 10 10 Typ. 0.8 10 14 Max 3/4 3/4 3/4 3/4 3/4 Unit pF W Vrms Vdc 1500 3/4 3/4 3/4 3000 3000 Switching Characteristics (Ta = 25C) Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 W VDD = 20 V, IF = 5 mA Min 3/4 (Note 2) 3/4 Typ. 0.3 0.1 Max 1 1 Unit ms Note 2: Switching time test circuit IF VDD IF VOUT 2 4 VOUT 10% tON 90% tOFF 1 6 RL 3 2002-04-19 TLP192G IF - Ta 100 240 C connection ION - Ta (mA) ION Allowable On-sate current (mA) 80 200 IF Allowable forward current 160 60 120 A, B connection 40 80 20 40 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IF - VF 100 Ta = 25C 200 Ta = 25C IF = 5 mA ION - VON (mA) (mA) 30 A connection 100 On-state current ION 10 Forward current IF 3 0 1 -100 0.3 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 -200 -4 -3 -2 -1 0 1 2 3 4 Forward voltage VF (V) On-state voltage VON (V) RON - Ta 50 ION = 120 mA IF = 5 mA 40 t<1s A connection 30 5 ION = 120 mA t<1s 4 IFT - Ta RON IFT 3 20 Trigger LED current On-state resistance (mA) (W) 2 10 1 0 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 4 2002-04-19 TLP192G tON, tOFF - IF 3000 Ta = 25C VDD = 20 V RL = 200 W 500 VDD = 20 V RL = 200 W IF = 5 mA tON, tOFF - Ta (ms) 1000 (ms) 400 tON tON, tOFF tON, tOFF Switching time tOFF 300 3000 Switching time 100 200 30 tON 100 tOFF 10 1 3 10 30 100 300 0 -40 -20 0 20 40 60 80 100 Input current IF (mA) Ambient temperature Ta (C) IOFF - Ta 30 VOFF = 350 V (nA) IF = 5 mA 10 Off-state current IOFF 5 1 0.5 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (C) 5 2002-04-19 TLP192G RESTRICTIONS ON PRODUCT USE 000707EBC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2002-04-19 |
Price & Availability of TLP192G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |